Quick answer
Yes, a lift can usually be added to an old building in Pakistan, whether it is a house, an apartment block or a plaza. The usual options are a new shaft inside the stairwell or a room stack, an external steel or glass shaft on an outside wall, or a compact machine-room-less lift where height is limited. The right option depends on the structure, so the first step is a site survey.
Many buildings in Karachi, Lahore and Islamabad were built 20 or 30 years ago without a lift. Owners now want one for elderly residents, for tenants on upper floors, or to make a plaza easier to rent. This guide explains how lift installation in an existing building works, what an engineer checks, and how to plan it without a long shutdown.
Can you install a lift in an old building?
In most cases, yes. The questions are where the lift will go, whether the structure can carry it, and how much height and depth are available at the top and bottom. A lift needs a vertical path through every floor it serves, a small pit under the lowest stop and clear height above the top stop.
Where the lift can go
| Location | Works well for | What to check |
|---|---|---|
| Inside the stairwell | Houses and apartment blocks with an open stair void | Width of the void and fire escape route |
| Stack of rooms or stores | Buildings with the same room on every floor | Slab cutting and beams |
| External shaft (steel or glass) | Plazas and homes with no space inside | Boundary, foundation and openings on each floor |
| Lift lobby or corridor end | Offices and apartments with a common corridor | Door positions and landing space |

What an engineer checks during the survey
- Structure: slabs, beams and columns around the opening, and whether a steel frame is better than a concrete shaft.
- Pit depth: how far you can dig below the ground floor.
- Overhead: clear height above the top floor. Low overhead is common in old buildings, and it can often be solved. See lifts without a machine room.
- Power supply: the lift needs a proper supply and a backup plan for load shedding.
- Access during work: how residents or tenants will move while the shaft is built.
Planning a lift for an existing building?
Send us photos of the stairwell or the wall where the lift could go, the number of floors and your city. An engineer will reply with the possible options and book a free site survey.
Which type of lift suits an old building?
- Machine-room-less traction lift: the most common choice for apartments and plazas, because no roof room is needed.
- Compact home lift: for houses, sized for 3 to 4 people or a wheelchair. Read the guide to lifts for a 3-storey house.
- Glass lift in an external shaft: a good option when there is no space inside, and it adds value to the building.
- Stairlift: the least civil work when only one person needs help on a straight staircase.
How the work is planned
- Free site survey and measurements
- Written proposal with the lift type, position and timeline
- Shaft drawings for your contractor, or a steel structure supplied with the lift
- Civil work: opening slabs, building the shaft and pit
- Lift installation, testing and safety checks
- Handover, training and maintenance under an AMC
Most of the disruption is during the civil work. Good planning keeps the staircase usable and limits noisy work to agreed hours, which matters in occupied apartment buildings.
Old buildings we work in
Hub Elevator installs lifts in existing buildings across Karachi, Lahore and Islamabad, from bungalows and older apartment blocks to commercial plazas and factories.
Frequently asked questions
Can a lift be installed in an old building in Pakistan?
Yes, in most cases. The lift can go in the stairwell, a stack of rooms, a corridor end or an external shaft. A site survey confirms the structure, pit depth and overhead first.
Does adding a lift to an existing building need a lot of civil work?
It depends on the position. An external steel shaft or a stairwell lift usually needs less slab cutting than a new shaft through rooms. The engineer will show the options during the survey.
Which lift is best for an old apartment building?
A machine-room-less passenger lift is usually the best fit because it does not need a room on the roof and suits limited height.
Can a lift be added to an old house?
Yes. Compact home lifts and glass lifts are often fitted inside the stairwell or on an outside wall of an existing house.
How do I start?
WhatsApp photos of the building, the number of floors and your city to 0333 2024498, and Hub Elevator will book a free site survey.
Get your building surveyed
Free site survey in Karachi, Lahore, Islamabad and Multan, with a written proposal.